EOS

Solar PV Modules

p1

Poly-Crystalline Silicon

CS6P is a robust solar module with 60 solar cells. These modules can be used for on-grid solar applications. Our meticulous design and production techniques ensure a high-yield, long-term performance for every module produced. Our rigorous quality control and in-house testing facilities guarantee Canadian Solar's modules meet the highest quality standards possible.

p1

Mono-Crystalline Silicon

Yingli Solar Panda is a new monocrystalline module technology with n-type solar cells that have average efficiencies higher than 18.5%. Combined with high transmission glass, module efficiencies are up to 16.2%.

  • Compared to traditional modules with p-type solar cells, Panda modules have lower initial degradation and higher performance under both high temperature and low irradiation conditions.
  • Tight positive power tolerance of 0W to +5W ensures you receive modules at or above nameplate power and contributes to minimizing module mismatch losses leading to improved system yield.

Inverters

p1

String Inverters

The three-phase string inverters in the 8.25 to 23 kW power classes are perfect for rooftop and groun-mounted systems from 8 kW upwards, right through to megawatt parks. They comply with all requirements for IP65 protection – their housing provides reliable protection from dust and water, including high pressure washing. These systems can therefore be installed out in the open without any problem. All string inverters are easy to handle and compact. Fast MPP tracking and a wide input voltage range also ensure high levels of efficiency.

p1

Central Inverters

Several highly efficient central inverters for open field sites and industrial rooftops. Low system costs and an extremely high level of efficiency makes these ideal solution for developers of large-scale PV systems.

p1

Backup Inverters

Highly and simply configurable, extendable and handles all Battery charging and control processes. Ensures maximum battery life, while maintaining high efficiency, a rugged aluminum enclosure and active cooling system.

Solar Water Heaters

p1

Integrated Solar Water Heater

  • Save on 60% of your Electricity Bill
  • Recover your investment in 2-3 years
  • Enjoy 12+ years of free Hot Water
  • Installed performance guaranteed by highly-experienced professionals
  • Comply with new National Water Heating Energy Regulations
  • Manufacturer Warranty: 5 years
Learn more

Deep-cycle Batteries

p1

VRLA battery

VRLA(Valve Regulated Lead Acid) battery is sealed lead- acid battery. It includes GEL type and AGM type, both have the following characteristics:

  • is sealed using special pressure valves and should never be opened.
  • is completely maintenance-free,needn’t topping in service life.
  • all of its electrolyte are immobilized (absorbed in AGM or fixed in Gel structure).
  • uses recombination reaction to prevent the escape of hydrogen and oxygen gases which normally lost in flooded lead- acid battery.
  • is non-spillable, and therefore can be operated in virtually any position(except upside- down).
p1

Gel VRLA battery

Besides the characteristics of VRLA, GEL battery has:

  • using thixotropic gelled electrolyte, it is in a solid state between the plates and separators.
  • not like traditional AGM electrolyte “starve” design, GEL battery has more 15~25% electrolyte volume than AGM type.
  • different type of separator, such as PE, PVC etc .
p1

Tubular Gel VRLA battery

Besides the characteristics of VRLA GEL, Tubular GEL battery has Tubular plates and separators

Mounting structures

p1

Tile roof mounting

TileA series tile roof mounting system has been specially designed to minimize the installation time. High degree of pre-assembly components enables you to use of one hand and a single tool to assembling all components. This will reduce installation time and cost significantly.

p1

Tin roof mounting

TinA series tin roof mounting system provides a simple, fast and cost effective mounting solution for PV modules on tin roofs. It has excellent adaptability, suit for almost all kinds of tin roofs. High degree of pre-assembly components, the use of one person and a single tool, and the intelligent design of the connections all result in a sizeable reduction in installation time and cost.

p1

Flat roof mounting

FlatA mounting system is a standard pitched 25°and allows foe minimum ballast with maximum profit.

With a folding aluminum tripod, this system is light weight, easy to carry about, The pre-assembly and distinctive product design, makes installation quick and easy. This system requires a minimum number of tools and steps to install. Outstanding adaptability

The unique low ballast system has been specifically developed for use on industrial buildings with low load tolerances. Quick installation

p1

Shingle roof mounting

This system is specially designed for Shingle roof, and 100% water proof.

p1

Ground mounting

GroundA mounting system is suitable for utility roofs and open field power plant, all PV arrays linked in a series can bear more wind load. This system prevails because of the advantage of non-penetration to the roof.

LED Lighting

p1

PAR Lamp

p1

MR16 Lamp

p1

Bulb

p1

Candle

p1

Tube

p1

Down Light

p1

Flat Light

p1

Street Light

p1

High-bay

p1

Flood Light